Home / Products / Serial Radios / XETA9S
Xeta9s
900 MHz Serial I/O Software Defined Industrial Radio
The Xeta9s Serial radio is an extremely capable and flexible industrial Frequency Hopping Spread Spectrum (FHSS) and Digital Transmission System (DTS) software defined radio (SDR) supporting the unlicensed 900 MHz frequency band with eight multi-function, independently programmable I/O channels. The Xeta9s utilizes a XetaWave Dual Decode Digital Architecture which offers significant receiver performance.
​
The Xeta9s supports multiple modulation schemes and features. The MultiSpeed mode allows Endpoints operating at different RF data rates to communicate with a single Access Point to achieve optimal data throughput given the available channel size and RF environment. ​The Enhanced Multipoint (EMP) mode provides an increase in throughput and a decrease in latency over traditional modes and against competitive products.
​
The Xeta9s also hosts a point to point wire replacement capability allowing the I/O input at one radio to be replicated at the I/O output of another radio.
​
All Xeta9s Serial radios are backwards compatible and over-the-air compatible with the XetaWave uTasker, Linux, Debian, and XetaEdge families. XetaWave’s seamless serial mode allows serial and Ethernet Endpoints to simultaneously communicate with an Ethernet Access Point. The Xeta9x serial radios support compatibility with the MDS TransNet, and TransNext master radios.
-
High Speed Over-the-air data rates from 57 kbps to 5.3 Mbps plus higher throughput when operating in EMP mode.
​
-
Dual Mode Frequency hopping and single channel operation.
​​
-
Adjustable RF Output Power output up to 250 mW (+24 dBm) for QAM modulations and 1 Watt (+30 dBm) for non-QAM modulations.
​​
-
8 Programmable I/O Signals Independently configure 4 I/O as analog inputs, analog outputs, or digital inputs and 4 I/O as digital inputs or outputs.
​​​​
-
Dual Mode Frequency Hopping Spread Spectrum (FHSS) and single channel operations.
​​
-
Robust Network Types Point to Point, Point to Multipoint, Enhanced MultiPoint, and Peer to Peer.
​​
-
Selective Modulation Multiple MSK, FSK, PSK, and QAM modulations.
​​
-
MultiSpeed Multipoint Enables end points to communicate with an access point at different RF data rates.
​​
-
Wire Replacement Replicate input signals from one location at another remote location.
PRODUCT VARIANTS
XETA9S-10INNFD-IO
Board Level ISM Unlicensed Radio
902-928 MHz | 1 Serial Data | 1 Serial Diagnostic | 8 I/O | 1W non-QAM | 250 mW QAM
XETA9S-10INNFD-FGRIO
Board Level ISM Unlicensed Radio
902-928 MHz | 1 Serial Data | 1 Serial Diagnostic | 1 FGR 10 pin | 8 I/O | 1W non-QAM | 250 mW QAM
ORDER TODAY
Benefit from XetaWave’s superior technology designed and supported by an industry-leading engineering and customer support team. These highly customizable programmable I/O radios are compatible with all XetaWave Xeta9 and Xeta9x radios.
​