Home / Solutions / X710 Alternative
Have a x710 network?
paying $2000+ for a SD or orbit series radio?
you could be saving $1000 or more with xetawave
Save money using state of the art technology that is supported, boots up faster, and consumes less power.
save money
-
You may be paying $2000 or more for a SD Series radio.
-
The list price for a XETAWAVE radio is $1026.
-
You could be saving $1000 or more per radio.
​
​If you're purchasing six SD9 radios annually to maintain you're networks, you're paying $12000 or more. Six XETA9 radios would cost you $6156 or less saving you at least $5844. The SD & Orbit Series radios include a lot of features that cannot be utilized within your X710 network. You're paying for these features and getting products that take longer to boot up and consume more power.
cheaper master station
-
You may be paying $14000 or more for an Orbit Master Station.
-
​The list price for a XETAWAVE Master (Comm) Station is $8870.
-
You could be saving $5130 or more per Master Station.
​​
Once the X710 remote radios have been migrated to a XetaWave radio, installing a XetaWave Master Station allows you to improve your network performance and retain the old X710 Master Station as backup for another X710 network.
faster bootup
-
Serial radios like the X710 and XetaWave's offerings power up fast.
-
Traditionally, Ethernet IP radios take much longer to power up.​
-
The SD Series radios power up quickly but the Orbit radios take much longer.
For installations in which a local PLC might be controlling when the radio is powered on and off, the faster the radio powers up, the faster the data is transmitter and the sooner the radio can be turned off.
power efficient
-
9710 radios draw up to 1.6 Watts in RX and Idle.
-
SD Series radios draw up to 1.9 Watts in RX or Idle.
-
​Serial XetaWave radios only draw up to 1.4 Watts in RX or Idle.
For applications where power consumption is critical, adding a SD or Orbit Series radio will increase the power demand over a traditional X710 radio while the serial XetaWave radio requires less power.
Your solution?
Xetawave
Replace an X710 remote radio operating in X710 mode with a XetaWave serial radio and begin saving money. Gain more capability once all the MDS radios within have been switched over.
​
Get started with paying less. For inquiries and orders, contact us.